TRB140 – Индустриален 4G LTE IoT рутер


Малък и бърз за внедряване на индустриален интернет – 4G LTE IoT рутер. Разширената функционалност на VPN, възможностите за сигурност и отдалеченото управление правят TRB140 най-добрата възможност за свързване на едно устройство.


  • TRB140
  • 1 x LTE антена (магнитно поставяне, SMA male, 3 m кабел)
  • Захранване – Евро стандарт
  • Micro-USB кабел (0.8 m)
  • LAN кабел
  • упътване

258.00 лв.

Промишленият LTE Cat 4 Gateway Board TRB140 е снабден с един Ethernet порт, цифрови входове / изходи и micro-USB порт. Компактният дизайн на TRB140 го прави  перфектен за приложение, при което едно устройство трябва да има надеждна интернет връзка. TRB140 е проектиран да се използва за индустриално приложение, затова разполага с широка гама от софтуерни функции, като управление на SMS, Firewall, Open VPN, IPsec, RMS и FOTA поддръжка.


  • 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A
  • 4G (LTE-TDD): B38, B40, B41
  • 3G: B1, B8
  • 2G: B3, B8


TRB140 first start

This is the approved revision of this page, as well as being the most recent.

This Wiki page contains the online version of the Quick Start Guide (QSG) for the TRB140 LTE Ethernet Gateway. Here you will find an overview of the various components found on the front and back sides of a TRB140 device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TRB140 device, you can also find a printed version of the Quick Start Guide in the device’s package.

Trb140 hd 1.png

Front view

No. Description
Trb140 front view v2.png
1 Power LED
2 Power socket
3 Ethernet port

Back view

No. Description
Trb140 back view v2.png
1 SIM card slot
2 Mobile antenna connector
3 Mobile connection type LEDs
4 Mobile signal strength indication LEDs
5 USB connector
6 Reset button


Power Socket Pinout
No. Description Wire color
1 Power Red
2 Ground Black
3 I/O Green
4 I/O White
Trb142 power socket pinout v3.png

Device configuration

1. Power on the device and connect the USB cable to your computer.
2. Allow the gateway to boot up. This might take up to 30 s.
3. Your computer’s OS should detect the USB device and install the drivers for the virtual NDIS network adapter. IP address is set automatically via DHCP.
4. Use a Web browser to go to gateway’s default address:
5. Use the following credentials to login:
Tr142 qsg device configuration 1 v2.png
6. Go to the WebUI’s Status → Overview page to check the signal strength:
Tr142 qsg device configuration 2 v2.png

Safety information

TRB140 gateway must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilixation of the communication module in prescribed applications and environments.

Radio specifications
RF technologies GSM, GPRS, EDGE, UMTS/HSPA+, LTE
Max. RF power 32 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE
Bundled accessories specifications*
Power AC/DC power adapter 9 V, 1 A, 4 pin plug
GSM/WCDMA/LTE antenna 698~868/1850~2690 MHz, 50 Ω, VSWR ≤ 2, gain** 2 dBi, omnidirectional, SMA male connector

* Order code dependent.

** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.

Qsg rut950 manual.PNG This sign on the package means that is necessary to read the User’s Manual before you start using the device

Qsg rut950 recycle.PNG This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste


TRB140 Configuration Examples

This is the approved revision of this page, as well as being the most recent.

This page contains various configuration guides for TRB140. Unlike the articles in the TRB140 Manual, which provide more general knowledge on all of the router’s features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren’t OS specific in any way and apply to any system.

Router control and monitoring

Modem control


Тегло 0.130 kg
Размери 6.0 × 7.0 × 1.8 cm
Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/Call SMS status, SMS configuration, Call utilities
LAN 1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX
Routing Static routing, Dynamic routing (Optional – BGP, OSPF v2, RIP v1/v2)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPP, PPPoE, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)
Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
DHCP Static and dynamic IP allocation
DDNS Supported >25 service providers, others can be configured manually
Authentication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; NAT; NAT-T
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
IPsec IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server services can run simultaneously
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA Firmware update from sever, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration
MQTT MQTT Broker, MQTT publisher
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS)
CPU ARM Cortex-A7 1.2 GHz CPU
RAM 128 MB (50 MB available for userspace)
FLASH memory 512 MB (70 MB available for userspace)
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices
Keep settings Update FW without losing current configuration
Operating system RutOS (OpenLinux based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools GPL package with built environment provided
I/O 2 x Configurable Digital Inputs/Outputs
Connector 4 pin industrial DC power socket
Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max
Power consumption < 5 W
Ethernet 2 x RJ45 ports, 10/100/1000 Mbps
I/O’s 2 x Configurable Digital Inputs/Outputs on 4 pin power connector
USB Virtual network interface via USB
Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED
SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power 4 pin DC connector with 1 x Digital input and 1 x Digital output
Anntenas 1 x SMA for LTE
Reset Reset/restore to default button
Casing material Aluminum housing
Dimensions 60 mm x 70 mm x 18 mm (H x W x D)
Weight 130 g
Mounting options Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30
Regulatory CE/RED, EAC, RoHS, WEEE
Standards Draft ETSI EN 301 489-1 V2.2.0, Draft ETSI EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESD EN 61000-4-2:2009
RS EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT EN 61000-4-4:2012
Surge protection EN 61000-4-5:2014
CS EN 61000-4-6:2014
DIP EN 61000-4-11:2004
Standards EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-1 V11.1.2, EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2
Standards IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
EN 50385:2017
EN 62232:2017

Файлове за изтегляне *

TRB140 DATASHEET (EN) – Datasheet-TRB140-v1.3.pdf    / Обновен: 2019-06-12

TRB140 QUICK START GUIDE (EN) – QSG_TRB140_EN_v2.1.pdf   / Обновен: 2019-05-10

SDK : TRB1420_R_00.01.01.2_SDK.zip  – (ver.TRB1400_R_00.01.01.2 2019.03.25 130MB)

General Public Licence (GPL) – Свали от ТУК 



На база 0 отзива

0.0 общо

Бъде първият, който ще оцени: “TRB140 – Индустриален 4G LTE IoT рутер”

Все още няма отзиви.

Call Now Button